9 Pixel Roofline - Candy Corn

Looking for something different than traditional icicles or boring rooflines? Our 9 Pixel Roofline Candy Corn might be just what you need. Printed in multiple colors to add an extra daytime touch to any display!

Pixel Type:

Prefer bullets? Candy Corns are designed with 9 pixel holes so, with a 100 bullet pixel strand at 4" spacing, 10 bulbs can be spaced about 8" apart, leaving only a single pixel after each bulb. You can even use those single pixels as a makeshift horizontal by adding our Single Pixel Clips (coming soon).

Seed pixels FTW? Not a problem, just add our Seed Pixel Adapters to your order and you can transform the Candy Corn for seed use. Use 2" spaced seeds to populate the prop, leaving a few (4 looks good) between each bulb.

Mounting:

Designed to be hung from the roofline or soffit using the built in 1/4" hole. Bolt or zip tie them to existing supports or add our Clip On Mounts (not included) to easily hang them from EMT or PVC pipe.

Measurements:

Each Candy Corn is 6" tall and 2.75" wide



Xmodels:

Xmodels for all items are included in the download. Each Xmodel includes submodels for Front Lighting, Back Lighting, and a preset Separator (pixels between bulbs). You may need to modify the Xmodel and submodels to fit the number of separator pixels you choose to use. Please feel free to contact us if you need assistance doing so.

Mounting:

Bulbs include a 1/4" hole to make mounting easy. You can zip tie or bolt the bulb to whatever is convenient. You can also use our Clip On Hangers to make installation onto EMT or PVC pipe quick and easy. Clip On Hangers include a removable plastic pin that's used to hold the hanger to the bulb. If you are in a particular windy area, you may need to replace the plastic pin with a zip tie or 1"x1/4" bolt and nut for a more secure mounting solution. The Clip On Hangers have a recessed area for the bolt head to rest so you can easily tighten a nut to the front of the bulb. Clip On Hangers also include a slot to install a zip tie to hold the hanger to the EMT or PVC, if necessary.

Shipping:

A Note About Our Printed Products:

Products are (mostly) printed upon ordering. We're not running a full blown 3D Printing shop so products may take 1 to 2 weeks (or longer) before shipping. If you need something in your hands sooner than 2-4 weeks, please contact us first to check on availability and timeframes. When we get closer to season, these products will very likely be unavailable so please order with plenty of lead time. Thanks!

3D printing can be a fickle beast. Sometimes parts come out beautiful with no effort and sometimes a minor blob of plastic is dropped where it shouldn't be or an edge doesn't completely adhere to the print bed, causing some minor fuzz on the corner. While we make every effort to print perfectly every time, it's just the nature of 3D printing, especially in multiple colors, for there to be a hiccup here or there. Nothing will ever be shipped that we wouldn't put in our own display, but 3D printed items may sometimes have minor imperfections that do not affect the overall look or function of the item.