Quantity | Price per item | Discount |
6 items | $1.85 | 8% off |
10 items | $1.75 | 13% off |
These are adapter plates that allow you to use seed pixels with 3D printed props originally designed for bullet pixels. These adapters have only been tested with "Flash The Neighbors" props but may be compatible with other brands as well. Note, because they are installed from the front, they are not 'technically' compatible with the Pixel Stick we sell because you can't access all 5 pixel holes from the front. You may be able to make them work by aligning and pulling them in from behind, but it's going to be a frustrating process. đŹ
2 types are available, one for 3 wire seeds and one for 4 wire or really thick 3 wire seeds. The 3 wire version has been tested with the 'standard' wire seeds from Chinese manufacturers as well as some of the 'thicker' wire seeds from US vendors. Compatibility with every brand is, of course, not guaranteed, but they are pretty universal as of March 2025. Choose your preferred size or choose Mixed and fill in the details in the notes.
Color Choice: Choose the color you'd like or choose 'FTN Props', specify the specific "Flash The Neighbors" prop(s) and add the correct number of adapters (each topper requires 20 adapters and each hanging bulb requires 9 adapters), and your order will be color coded accordingly. Note that some topper pixel holes are split by multiple colors and the adapters are single color so the color of the adapter will be at our discretion.
Installation: Push the seed through the pixel hole from the back, then put the adapter plate behind the seed with the flat part towards the hole. Pull the seed back into the hole, aligning the adapter plate and ensuring the wires stay in the cutouts on the adapter plate. Push the adapter plate down into the hole until the edge are flush with the front of the prop. A small screwdriver or plastic pry tool slipped between the seed and the adapter plate makes it easy to push the plate down flush. For props with tight wires, you may need to first put the plate into the hole sideways, then use a screwdriver or pry tool from behind to square up the adapter plate before being able to fully insert it.