Reindeer Face with Push Button

************************************************************************************************************
NOTE: As of 2024/08/01, one of the colors I use for this reindeer keeps going out of stock and I've not yet located a suitable replacement (i.e. something in a color I'm happy with). For now, stock may be very limited. I'm still allowing pre-orders (which will be filled in order received) to gauge interest but there's a chance your pre-order may need to be cancelled (and refunded, of course) if the filament never comes back in stock and/or I can't find a replacement that looks good. Sorry for the inconvenience.
************************************************************************************************************

A cute reindeer face with a push button nose (red nose is included). Printed in 5 colors, this reindeer is 16" tall and 13" wide. The reindeer holds 76 bullet pixel nodes (xModel included) and is printed in 3 parts with puzzle joint interlocks. The back of the reindeer is flat so mounting options are up to you. The nose has a 60mm wide plastic 'lid' that could be used for mounting with a little bit of planning. Ideally, you'll want to mount the prop so the button is against something more or less solid to allow for easy pushing.

Note: The button includes a 12v LED bulb (can also run off 5v but it will be a little dull) and a push button relay. You need to wire the relay to 'something' in order for the button to actually do anything. Common uses are wiring it to a Falcon Pi Player (using a Raspberry Pi) to control light effects, sounds, etc.

Shipping:

A Note About Our Printed Products:

Products are (mostly) printed upon ordering. We're not running a full blown 3D Printing shop so products may take 1 to 2 weeks (or longer) before shipping. If you need something in your hands sooner than 2-4 weeks, please contact us first to check on availability and timeframes. When we get closer to season, these products will very likely be unavailable so please order with plenty of lead time. Thanks!

3D printing can be a fickle beast. Sometimes parts come out beautiful with no effort and sometimes a minor blob of plastic is dropped where it shouldn't be or an edge doesn't completely adhere to the print bed, causing some minor fuzz on the corner. While we make every effort to print perfectly every time, it's just the nature of 3D printing, especially in multiple colors, for there to be a hiccup here or there. Nothing will ever be shipped that we wouldn't put in our own display, but 3D printed items may sometimes have minor imperfections that do not affect the overall look or function of the item.